Reduce the demand for power

  • Wednesday, March 19, 2014

In addition to turning off the lights, be sure to use compact fluorescent light bulbs, or CFLs. PHOTO BY METRO CREATIVE


In addition to turning off the lights, be sure to use compact fluorescent light bulbs, or CFLs, instead of traditional incandescent bulbs. CFLs consume less energy, don't give off nearly as much heat as incandescent bulbs and can last as long as 10,000 hours, which is roughly 10 times as long as the best incandescent bulb.

Switching bulbs from incandescent to more efficient LED or CFL bulbs can save money in the long run.

Replace inefficient incandescent lighting with more efficient compact fluorescent or LED lighting that also produce less heat.

While daylight saving time may not be all it was intended to be, people can still do their part to conserve energy throughout the year.

A few tips:

Purchase light fixtures that allow for a higher wattage of light bulb, which will be brighter. You may find higher wattages even in energy-conserving compact fluorescent bulbs and LED bulbs.

Turn off the lights (and change the bulbs). Perhaps the simplest way to conserve energy around the house is to turn off the lights in empty rooms. It's easy for all residents of a home to turn on a light when entering a room, only to leave that room but keep the lights on. But electricity used for lighting can constitute as much as 10 percent of a monthly utility bill. How much of that electricity is being used to illuminate empty rooms? Get in the habit of turning lights off whenever you leave a room. Though the savings here might not be substantial, turning off the lights will help conserve energy.

Spend more time outdoors, grilling outside and dining on the patio.

Use appliances during off-peak hours to save money on energy costs.

Rely on sunlight as much as possible, opening curtains and blinds to let more light into your home.

Tailor your schedule to the daylight hours. Rise when the sun rises and go to bed when the sun sets to reduce your reliance on electricity.

How to clean up a broken CFL

Compact fluorescent light bulbs, or CFLs, have grown increasingly popular as more and more consumers make environmentally conscious purchases. CFLs use less energy than traditional light bulbs, and, though they contain mercury, they actually reduce the total mercury emissions because of their energy savings.

Though CFLs reduce the demand for power, they can be dangerous if broken. When broken, CFLs can release mercury vapor into the air, and those vapors can threaten a handler's health. While the Environmental Protection Agency notes that CFL manufacturers are working to reduce the amount of mercury in their products, it's still best to exercise caution when a CFL breaks. The following are a few tips, courtesy of the EPA, on what to do when a CFL breaks in your home or office.

Prior to cleanup

When a CFL breaks, there are some important steps to take before you begin cleaning it up.

Empty the room of people and pets. As mentioned, mercury vapors can be harmful to a person's health, so reduce risk of physical harm by asking people to leave the room and take any pets with them.

Air out the room. Let some fresh air into the room where the bulb broke. Open the windows or a door to the outdoors and air the room out for five to 10 minutes.

Turn off the air conditioning or heating system.

Gather the materials for cleanup, which include stiff paper or cardboard, sticky tape, damp paper towels or disposable wet wipes and a glass jar with a metal lid that can be sealed. If you don't have a jar on hand, a sealable plastic bag will work as well.

During cleanup

Once the room has been aired out and the materials for cleanup have been gathered, a few additional precautions are necessary to properly dispose of a broken CFL.

Do not use the vacuum. Though it might be tempting to use the vacuum, it could also be risky. A vacuum could spread mercury-containing powder or mercury vapors, so only use one if there is still broken glass around after all other cleanup steps have been taken.

Be thorough. When cleaning, be sure to pick up every piece of broken glass and sweep any visible powder.

Discard cleanup materials. Once you have finished cleaning, discard the materials you used by placing them in a sealable container.

After cleanup

Once you have finished cleaning the room where the bulb broke, it's time to discard the materials.

When cleanup has ended, immediately discard bulb debris and the materials used during cleanup (including a vacuum bag if you used a vacuum). Place the materials in a trash can or in a protected area, especially if you have curious kids around the house, until they can be disposed of.

Be sure you are legally disposing of the materials. Local governments typically have their own laws about discarding CFLs (broken or unbroken), with many mandating that such bulbs be taken to the local recycling center. Be sure to obey these laws.

– Keep airing out the room if possible. Though airing the room out for five to 10 minutes might be adequate, when possible, air the room out for several hours. In addition, if possible, keep the heating and cooling system off for a few hours after the bulb has broken.

CFLs save energy and can save homeowners substantial amounts of money on their monthly energy bill. However, when these bulbs break, let caution reign with regard to cleanup.

Latest Videos
On Vacation
News from Twitter

Moultrie News

© 2016 Moultrie News an Evening Post Industries company. All Rights Reserved.

Registration on or use of this site constitutes acceptance of our Terms of Service, Privacy Policy and Parental Consent Form.